16 Closet Office Ideas You’ll Want to Recreate

Since we do not have any outlets inside the closet, we needed to run an extension cord from outside the closet to supply power. The Sleek Socket was the PERFECT solution for a neat and clean convert closet to office way to run an extension cord into the closet. It comes with everything you need to neatly secure the cord to the wall, and it blends in with the crown moulding instead of being an eye sore.

How do you make Cloffice?

  1. 1 Remove your closet doors.
  2. 2 Pick a desk that fits the width of your closet.
  3. 3 Line the wall with shelving for extra storage space.
  4. 4 Pick the perfect office chair.
  5. 5 Connect the space to electricity.
  6. 6 Set up your office equipment.
  7. 7 Add extra lighting to brighten up the space.

“​​We started by taking out the doors and hardware from the pre-existing closet and then patched, sanded, and painted the interior,” she tells AD. Use an awl or your drill to make a pilot hole in the drywall that is slightly smaller than the end of the drywall anchor so it’s snug. Push the plastic drywall anchors into the holes. Now you will push the drywall anchors into the wall. The anchors should line up with the holes you already made in the 1 x 2. In this post, I’ll be showing you ideas for how to design your own DIY closet desk and will show you how I transformed a small walk-in closet into a cloffice. Running shelves up the back of the closet is an easy and obvious solution.

FlexJobs Is SO Much More Than Just a Job Board

She cut a U-shaped nook into her desktop, allowing plenty of space for the chair to be pushed in. “After removing the doors, we added a cabinet that serves as entry table with drawers for storing scarves, gloves, and such,” says Strat. “Then we painted the cabinet and interior of the closet in the same color and finish as the https://remotemode.net/ trim to tie the space all together.” The result? An entry nook that looks like a designer built-in. This is a great solution for small spaces that need miscellaneous storage but lack dedicated entryways. As a final step, install some additional beams on an angle, extending from the edge of the closet entrance to the back wall.

Line up the slide by centering the line in screw holes. Drop the top into place and attach it from underneath with 2-1/2-in.

The Details – My Finished Home Office in a Closet

…or if you want an even lower commitment, here are some great decals. These are great to personalize kid’s rooms or to personalize their workspace. This will be used to keep clean lines between the different paint colors and protect the floor and any trim that will not be painted. Wood Clamps – These will be used to hold down your guide when cutting your butcher block. Your creativity is really fantastic.Closest office looking is amazing.All tips are very helpful that you have mentioned. Really love what you were able to do with your space.

convert closet to desk

You don’t need many pocket holes for the supports, as gravity does most of the work. The few screws holding the shelves to the supports just keep them from shifting. In total the U-shaped shelf has six screws holding it in place, while each of the smaller shelves has two. Rather than risk squeezing a standard size desk into a small space, she opted to purchase a floating piece that could easily be installed. Have you hopped on the closet office bandwagon yet? The closet office (or «cloffice,» as it’s commonly called), can take a couple of forms.

Step Three: Get Organized

It looks incredibly comfy, and it also provides a fun pop of color against the cloffice’s neutral color palette. You can get all the deets on her setup (including how she made that pretty herringbone wall design!) over on her blog.

  • Then measure the space between the two boards.
  • Make sure the one you choose has a height-adjustable seat so that you could tuck it under your desk.
  • I then applied wood filler and sanded to make a smooth, rounded edge.
  • While I could have made the desk in such a way that the doors would still close, I decided not to.

Note that finishes like this can take a week to fully cure, depending on the temperature and humidity of the room. You can install them in less time, just don’t place anything heavy on them or you’ll put permanent marks on the surface. Once the glue has cooled, carefully trim off the excess edging with a new blade. While they do make little edging-trimming tools for this purpose, I find they don’t give as much control as holding a hobby knife directly.

European Space-Saving Hangers

Cut out paper templates or mark their outer edges in pencil so you have a solid idea of how everything will and won’t fit. Why not consider converting a closet into an office? If your work situation suddenly moved home last year, I’m willing to bet you tried to get by without a desk at first. Personally, I much prefer being able to leave my laptop set up, notepads open, and pens scattered. Nail a 1×3 to the lower cabinet edge to create a valance for under-cabinet lighting. Complete the installation by nailing on the face frames .We used a 1×3 for the bottom face frame to hide the under-cabinet lighting. Then screw countertop supports to studs at the back and sides of the closet.

What is a Cloffice?

What in the world is a cloffice? Basically, it's a closet that has been turned into an office. The combination of the two words makes this fun new term that everyone has been requesting from My Custom Closet.